Nilfisk-ALTO DIGITAL X OVER - Manual (Page 11)

10
This graphic screen shows the frequency response of the channel.
Use Up/Down/Left/Right keys to select one of the five fields: Page Number, Filter Number, Gain, Frequency,
Bandwidth. The selected value can be changed by means of the dial. The selected filter's frequency will
be shown by a vertical segment on the display (see above).
When a filter parameter is modified, the audio signal is processed real-time, while the picture on the
display waits briefly to update. During this waiting time, an asterisk is shown in the upper right corner
of the window, until the graphic is processed.
To access the following screen select page number and press Enter, to get back press Esc.
DLY. F 0000 us
VOL. 0.00 dB
PRESET 01 IL
DLY. A 000 ms
2 / 2
DLY. F 0000 us
VOL. 0.00 dB
PRESET 01 IL
DLY. A 000 ms
2 / 2
DLY. F 0000 us
VOL. 0.00 dB
PRESET 01 IL
DLY. A 000 ms
2 / 2
DLY. F 0000 us
VOL. 0.00 dB
PRESET 01 IL
DLY. A 000 ms
2 / 2
Use Up/Down/Left/Right keys to select one of the four fields: Page Number, Volume, Delay Fine, Delay
Adjust; the selected value can be changed by means of the dial. To access the precedent screen select
page number and press Esc.
c. OUT 1 / 2 / 3 / 4 / 5 / 6
Here output channels can be configured:
EDIT PARAMETRIC FILTERS (page 1 of 4)
B: 0.15 F: 20
1 / 4
PRESET 01 O1
PEQ 01 G: 00.0
B: 0.15 F: 20
1 / 4
PRESET 01 O1
PEQ 01 G: 00.0
B: 0.15 F: 20
1 / 4
PRESET 01 O1
PEQ 01 G: 00.0
B: 0.15 F: 20
1 / 4
PRESET 01 O1
PEQ 01 G: 00.0
B: 0.15 F: 20
1 / 4
PRESET 01 O1
PEQ 01 G: 00.0