Nilfisk-ALTO DIGITAL X OVER - Manual (Page 13)

12
Use Up/Down/Left/Right keys to select one of the five fields: Page Number, Polarity, Limiter Threshold,
Limiter Release, Limiter Attack; the selected values can be changed by means of the dial.
To access the precedent page select page number and press Esc.
When the current preset has been edited, it is necessary to save this preset by means of the STORE
function, otherwise whatever preset loading or power cycle of the system will overwrite and erase
Completely the edited data.
: These keys are used to navigate the menus and to modify the parameter values. Up/Down/Right/Left key
: These keys are used to access or to leave the menus, or to confirm the parameter values. Enter/Esc key
: This key allows the user to enter the edit menu (the related LED will light) Edit key
When entered the edit menu, the user will be able to access and modify all the parameters related to the
THR. 00 dB
PRESET 01 O1
4 / 4
ATK. 0.05 S
REL. 0.4 S
POL. DIR
POL. DIR
THR. 00 dB
PRESET 01 O1
4 / 4
ATK. 0.05 S
REL. 0.4 S
POL. DIR
THR. 00 dB
REL. 0.4 S
PRESET 01 O1
4 / 4
ATK. 0.05 S
POL. DIR
THR. 00 dB
REL. 0.4 S
PRESET 01 O1
4 / 4
ATK. 0.05 S
POL. DIR
THR. 00 dB
REL. 0.4 S
PRESET 01 O1
4 / 4
ATK. 0.05 S
process, when the user modifies one parameter value, the LED starts to blink to signal the update. The
LED will blink until the storing of the new modified preset in one of the 64 available locations.
Vu-meter:
This function allows the user to use the vu-meter to show the input signal level.
Mute keys: LTODRIVE3.4 has 6 mute keys.(each channel has one mute key).
Press the mute key, the related channel is muted.
5.APPLICATION ILLUSTRATION
2.Plug the left line-in into INPUT1 and the right line-in into INPUT2
3.Set OUTPUT1, OUTPUT2, OUTPUT3, OUTPUT4,
as high, mid, low, OUTPUT5,OUTPUT6 high, mid, low
frequency band OUT separately.
4.Connect the OUTPUT1, to the high frequency amplifier, OUTPUT2, to the mid frequency OUTPUT4 OUTPUT5
to the low frequency amplifier. amplifier, OUTPUT3,OUTPUT6
1.Set the input /output path as the following : connection
5.1 LTODRIVE 3.4 2-Way Input, 6- Way Output (High, Mid, Low, High, Mid, Low)
If you want to present your LTODRIVE 3.4 in a 2-way input, 6-way output (high, mid, low, high, mid,
low level) application, please connect your system as the following illustration step by step:
ROUTING
R
L
IN
O
U
T
PRESET 01
1
2
3
4
5
6
1 / 1