AMCC 3WARE 9690SA User Manual
Page 26
Chapter 3. Installing a Battery Backup Unit
22
3ware 9690SA SAS/SATA RAID Controller Installation Guide
4
Mount the battery in the selected location by snapping it in place.
a
Insert the two clips on the top of the battery module into the
two slots at the top edge of positions 2 or 3 (Figure 15), or
in the holes at the left edge of position 1.
b
Press down gently on the battery module until the bottom
clip snaps into place in the lower hole.
Figure 15. Attaching the battery module to the remote board
9
Insert the remote battery board in the chosen expansion slot and
secure the bracket with the screw you removed in step 2. (Note
that the remote battery board does not have a connector that
inserts into a slot on the motherboard).
Pi
Bottom clip will snap in here