AMCC 3WARE 9690SA - Manual (Page 29)

Replacing the Battery
www.3ware.com 25
Figure 17. Removing the power cable from the BBU module
3 Remove the remote battery board from your system.
a Press down on the top of the battery module to free the clip
on the bottom of the module.
b While pressing down on the top of the battery module, lift
out the bottom of the battery module slightly.
c Once the bottom of the module is free, slide the module up
to release the clips on the top.
Figure 18. Removing the battery module
Press down on the
lever-like clip and pull
the connector out.
1
2 3
2
2 2 3 3
3
1
1
1
Bottom clip
a) Push the
battery module
down gently.
b) Lift out the
bottom of the
battery module
to release the
clip on the
bottom edge.
c) Lift up to
remove the clips
on the top edge.