Nikon D4S - Manual (Page 189)

167
r
6
Check the results.
If the camera was able to measure a
value for white balance, C will flash
in the control panels for about six
seconds, while the viewfinder will show
a flashing
a.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance. A flashing
b a will
appear in the control panels and
viewfinder for about six seconds. Press
the shutter-release button halfway to
return to Step 5 and measure white
balance again.
Top control panel
Rear control panel
Viewfinder
Top control panel
Rear control panel
Viewfinder