Nikon D4S - Manual (Page 262)

240
t
❚❚Setup Menu Options
The Location data item in the setup menu contains the options
listed below.
• Standby timer: Choose whether or not the exposure meters will
turn off automatically when a GPS unit is attached.
• Position: This item is only available if a GPS device is connected,
when it displays the current latitude, longitude, altitude,
Coordinated Universal Time (UTC), and heading (if supported) as
reported by the GPS device.
• Set clock from satellite: Select Yes to synchronize the camera
clock with the time reported by the GPS device.
Option Description
Enable
Exposure meters will turn off automatically if no operations
are performed for the period specified in Custom Setting c2
(Standby timer (
0 324); to allow the camera time to
acquire location data when a GP-1 or GP-1A is connected,
the delay is extended by up to one minute after exposure
meters are activated or the camera is turned on). This
reduces the drain on the battery.
Disable
Exposure meters will not turn off while a GPS unit is
connected; location data will always be recorded.