First steps, Charging the battery – Nikon S10 User Manual

Page 16

Advertising
background image

6

First St

eps

First Steps

Charging the Battery

The camera uses a rechargeable EN-EL5 Li-ion battery (supplied). Charge the bat-
tery with the supplied MH-61 battery charger before fi rst use or when the battery
is running low.

1

Plug the charger in

Connect the power cable to the charger (

ቢ) and

then plug it into a power outlet (

ባ). The CHARGE

lamp will light (

ቤ).

3

Charge the battery

The CHARGE lamp will blink as the battery charg-
es. (If the lamp fl ickers rapidly, either the tem-
perature is not in the range of 5 – 35 °C/41 – 95 °F
supported by the charger or the battery is faulty.
If the battery is faulty, unplug the charger im-
mediately and bring the battery and charger to
a Nikon-authorized service representative for in-
spection.) A fully-exhausted battery will charge in
about two hours.

Charging is complete when the CHARGE lamp
stops blinking. Remove the battery and unplug
charger.

2

Insert the battery

Remove the battery terminal cover and insert the
battery as shown, matching the projections on
the battery to the indentations in the charger.

The Battery Charger

Read and follow the warnings and cautions on pages ii–iii of this manual. Use with compat-
ible batteries only.

©

©

©

Advertising