Inserting the battery – Nikon S10 User Manual

Page 17

Advertising
background image

7

First St

eps

Batteries

Read and follow the warnings and cautions on pages ii–iii and 75 of this manual. The camera
can be used with EN-EL5 batteries only; do not, under any circumstances, attempt to use other
types
. If desired, the optional EH-62A AC adapter kit can be used to power the camera for
extended periods (

72). Do not, under any circumstances, use another make or model of

AC adapter. Failure to observe this precaution could result in overheating or in damage to
the camera.

Removing the Battery

Turn the camera off before removing or inserting batteries. To
eject the battery, open the battery-chamber/memory card
slot cover and slide the battery latch in the direction shown.
The battery can then be removed by hand. Note that the bat-
tery may become hot during use; observe due caution when
removing the battery.

Inserting the Battery

After charging the battery, insert it as described below.

1

Open the battery-chamber/memory card slot

cover

2

Insert the battery

The orange battery latch is pushed aside as the
battery is inserted. The battery is fully inserted
when the latch clicks back into place.

Inserting the Battery

Inserting the battery upside down or backwards could
damage the camera. Check to be sure the battery is in
the correct orientation.

3

Close the battery-chamber/memory card slot

cover

©

©

©

©

Advertising