Troubleshooting – Nikon S10 User Manual

Page 89

Advertising
background image

79

Te

chnical Not

es

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon representative. Refer to the page
numbers in the right-most column for more information.

Problem

Solution

Camera turns off
without warning

• Battery is low.
• Camera has turned off automatically to save power.
• Battery is cold.

10

10, 70

89

Monitor is blank

• Camera is off .
• Battery is exhausted.
• Standby mode: monitor turns on when controls are used.
• Flash lamp blinks red: wait until fl ash has charged.
• USB cable is connected.
• A/V cable is connected.
• Time lapse or interval timer photography in progress: mon-

itor turns off automatically between shots

• Lens cap is closed: open lens cap.

10
10
10
16

48, 51

47

32, 58

3

No indicators appear

in monitor

[Hide info] is selected for [Photo info]. Select [Show info].

68

Monitor is hard to

read

• Monitor has dimmed to save power: monitor brightens

when controls are used.

• Adjust monitor brightness.
• Monitor is dirty: clean monitor.

10

68
75

Camera clock is not

correct

Check camera clock regularly against more accurate time-
pieces and reset as required.

66

Camera settings reset

Clock battery exhausted: recharge clock battery. Pictures
recorded before clock has been set will have time stamp of
“00.00.0000 00:00”; movies will be dated “01.09.2006 00:00.”

66

No picture taken

when shutter-release

button is pressed

• Camera is in playback mode: press

button.

• Menus are displayed: press

button.

• Battery is exhausted.

37
13
10

Camera can not focus

using autofocus

• Subject is low in contrast, dominated by repeating geomet-

ric patterns, covers too small an area of the frame, or con-
tains many fi ne details, objects of sharply diff ering bright-
ness, or objects at diff erent distances from the camera. Use
focus lock to focus on another subject at same distance.

• [Off ] is selected for AF assist option in camera setup menu.
• Focus error. Turn camera off and then on again.

60

70
10

Pictures are blurred

• Use vibration reduction (VR) or use tripod and self-timer.

• Use fl ash.
• Use BSS.

2, 18,

20, 32

16
59

Advertising