Nikon P7000 - Manual (Page 189)

175
Setup Menu
Basi
c Came
ra Setup
Vibration Reduction
Set the vibration reduction for taking still pictures and movies. Use to correct blur,
which is caused by the slight hand movements known as camera shake that
commonly occur when shooting at the telephoto zoom position or at slow shutter
speeds.
When the camera is stabilized for still picture shooting with a tripod, set vibration
reduction to Off.
When vibration reduction is enabled, the current setting is displayed during
shooting (
A6, 25). Nothing is displayed when the setting is Off.
B
Notes on Vibration Reduction
• After the power is turned on or the camera enters shooting mode from playback mode, wait until
the display stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
Press the d button M z (Setup menu) (A168) M Vibration reduction
On (default setting)
Compensates for camera shake. The camera automatically detects the panning
direction and only corrects for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration reduction only
reduces vertical shake. If the camera is panned vertically, vibration reduction only
compensates for horizontal shake.
Off
Vibration reduction is disabled.