Nikon P7000 User Manual
Page 86
72
Changing the Frequently Used Settings for Shooting (
A, B, C, D Modes)
More on
Sh
ooting
1 If the number of exposures remaining is 10,000 or more, “9999” is displayed.
2 The print size at an output resolution of 300 dpi.
Print sizes are calculated by dividing the number of pixels by the printer resolution (dpi) and
multiplying by 2.54 cm (1 in.). However, even with the same image size setting, images printed at
higher resolutions print smaller than the size indicated, and those printed at lower resolutions print
larger than the size indicated.
3 The print size of NRW (RAW) images differs according to the image size of the NRW (RAW)
processed images (
D
Printing Images of Size
1:1
Change the printer setting to “Border” when printing images with the size set to 1:1.
The images may not be printed in 1:1 ratio depending on the printer.
See the instruction manual of the printer or check with the authorized print dealer for further details.