Nikon S710 - Manual (Page 119)

107
Shooting Options: The Shooting Menu
Sh
oot
in
g, Playba
ck an
d
Se
tu
p Me
nu
s
Camera Settings that Cannot Be Set at the Same Time
Restrictions apply to the following settings in W, X, V and U modes.
Flash mode
Flash turns off at
Continuous settings of Continuous, BSS or Multi-shot 16.
Applied setting is restored when
Single is selected.
Self-timer
If self-timer is on, only one shot will be taken when shutter is released, regardless of
settings chosen for
Continuous.
Applied
Continuous settings are restored when picture is taken or self-timer is
turned off.
Continuous
If
Continuous setting is set to Multi-shot 16, Image mode will be set to R
Normal (4352).
If
Continuous mode is restored to any setting other than Multi-shot 16 the
settings for
Image mode will also be restored.
ISO sensitivity
When
ISO sensitivity is set to 6400 or 12800, Image mode cannot be set to Q
4352×3264, R 4352×3264, R 3264×2448, L 2592×1944, P 4352×2448, or
m 1920×1080. At these image mode settings, selecting 6400 or 12800 for ISO
sensitivity automatically switches the Image mode setting to M 2048×1536.
However, if the image mode is set to m
1920×1080, the image mode will be
changed to N
1024×768.
When any option other than
6400 or 12800 is next selected for ISO sensitivity,
the original image mode setting is restored. At an
ISO sensitivity setting of 6400
or
12800, the Multi-shot 16 option (A 100) of the continuous shooting mode is
not available. At a
Continuous setting of Multi-shot 16, selecting 6400 or 12800
for
ISO sensitivity switches the Continuous setting to Single. The Continuous
setting does not change even when
ISO sensitivity is set to options other than
6400 or 12800.
White balance
White balance is automatically set to
Auto and cannot be adjusted when Black-
and-white, Sepia or Cyanotype is selected for Color options.
Applied white balance setting is restored when
Standard color or Vivid color is
selected.