Nikon S710 - Manual (Page 151)

139
Techni
cal N
o
te
s
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 117
B Battery running low. Prepare to charge or
change battery. 12
N
Battery exhausted.
Battery exhausted. Charge or change battery. 12
P
Battery temperature
high
Battery temperature is
high. Turn off camera, and allow
battery to cool down
before resuming use. After
5 seconds, this message
will disappear, the monitor
will turn off, and the flash
lamp will blink rapidly.
After the lamps blink for 3
minutes, the camera will
turn off automatically, but
you can also press the
power switch to turn it off
manually. 15
Q ( ● blinks red)
Camera cannot focus. • Refocus.
• Use focus lock. 24, 25
25
P
Please wait for the
camera to finish recording.
Camera cannot perform
other operations until
recording is complete. Wait until message clears
from display automatically
when recording is
complete. 25
N
Memory card is write
protected.
Write-protect switch is in
“lock” position. Slide write-protect switch
to “write” position. 19
P
This card cannot be
used.
Error accessing memory
card. • Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
133
18
18
P
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not been
formatted for use in
COOLPIX S710. Choose
Yes and press k
to format card.
19