Nikon L830 - Manual (Page 119)

E 19
Re
fe
re
nce
S
ect
ion
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
• Check printer settings.
3
Connect the camera to the printer using the USB cable.
• Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an
angle when connecting or disconnecting them.
4
Turn on the camera.
• The PictBridge startup screen (1) is displayed in the camera monitor, followed by the
Print selection screen (2).
Print selection
15/05/2014 No. 32 32
1 2