Nikon L830 - Manual (Page 133)

E 33
Re
fe
re
nce
S
ect
ion
B
Notes About Continuous Shooting
• When a setting other than Single is selected, the flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• It may take some time to save the images after shooting.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When using Continuous H: 120 fps, Continuous H: 60 fps, or Multi-shot 16, banding or
variance in brightness or hue may occur in images that were captured under lighting that flickers
at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.
• When ISO sensitivity is 1600 or 3200, the rate at which images are captured continuously may
decrease.
• The setting may not be changed when using certain settings of other functions.