Nikon L830 - Manual (Page 191)

F 13
Te
chni
cal
Note
s and
In
de
x
Nikon Transfer 2 does not
start when camera is
connected to a computer.
• The camera is off.
• The batteries are exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
20
20
74, 77
–
79
Images to be printed are not
displayed.
• The memory card contains no images. Replace the
memory card.
• Remove the memory card to print images from the
internal memory.
14
15
Cannot select paper size
with camera.
The camera cannot be used to select the paper size in
the following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select the paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
74, E20,
E22
–
Problem Cause/Solution A