Nikon D4 - Manual (Page 18)

8
St
ep 1:
C
o
nnec
tin
g an E
thern
et C
a
b
le
Step 1: Connecting an Ethernet Cable
After starting the computer and logging in, ready the camera and
WT-5 as described below.
1
Insert a memory card.
Turn the camera off and insert a memory
card (do not turn the camera off while
data are being transferred to the
computer). This step can be omitted in
camera control mode (
019).
2
Connect an Ethernet cable.
Connect the Ethernet cable as shown below. Do not use force
or insert the connectors at an angle.