Nikon D4 - Manual (Page 92)

82
Manual Profile Creation
Follow the steps below to manually configure the camera for
connection to ftp and http servers. Note that changes to the
current profile will be lost if the camera is turned off during setup;
to prevent unexpected loss of power, use a fully-charged battery
or an optional AC adapter designated for use with your camera. If
you are connecting to an ftp server behind a firewall, you may also
need to adjust firewall settings to create exceptions for the ftp
ports used by the camera (ports 21, 22, and 32768 through 61000).
1
Display network profiles.
In the network menu, highlight Network
settings and press
2 to display the
profiles list and other network settings.
2
Select Create profile.
Highlight Create profile and press 2.
Note that if the list already contains nine
profiles, you will need to delete an
existing profile using the
O (Q) button
before proceeding ( 053).
3
Select Configure manually.
Highlight Configure manually and press
2.