Step 1: connecting an ethernet cable – Nikon D4 User Manual
Page 46
Advertising
36
St
ep 1:
C
o
nnec
tin
g an E
thern
et C
a
b
le
Step 1: Connecting an Ethernet Cable
After starting the ftp server, connect the camera as described
below.
1
Insert a memory card.
Turn the camera off and insert a memory
card (do not turn the camera off while
data are being transferred to the
computer). This step can be omitted in
camera control mode.
2
Connect an Ethernet cable.
Connect the camera to the ftp server as shown below. Do not
use force or insert the connectors at an angle.
3
Turn the camera on.
Rotate the power switch to turn the
camera on.
Power switch
Advertising