Nikon J2 - Manual (Page 20)

18
s
4 Attach a lens.
Be careful to prevent dust from entering the camera when the
lens or body cap is removed.
5 Turn the camera on.
Press the power switch to turn the
camera on. The power lamp will
briefly light green and the monitor
will turn on. Be sure to remove the
lens cap before shooting.
Check the battery level and number
of exposures remaining in the moni-
tor (0 15).
A Turning the Camera Off
To turn the camera off, press the power
switch again. The monitor will turn off.
Keeping marks aligned, position lens on
camera, then rotate until it clicks into place.
Mounting mark
(camera)
Mounting mark (lens)
Mounting mark (lens)
Battery level
Exposures remaining