The built-in flash – Nikon J2 User Manual

Page 57

Advertising
background image

55

t

To use the flash, raise it by sliding the
flash pop-up control. Charging begins
when the flash is raised; once charging is
complete, a flash-ready indicator (I) will
be displayed when the shutter-release
button is pressed halfway. The following
flash modes are available; choose a flash
mode as described on the following
page.

The Built-in Flash

N

Fill flash

The flash fires with every shot. Use when
the subject is poorly lit or with back-lit sub-
jects to “fill in” (illuminate) shadows.

NY Red-eye reduction

The red-eye reduction lamp lights before
the flash fires, reducing “red-eye” caused
by light reflecting from your subject's reti-
nas.

NYp

Red-eye reduction +
slow sync

Combines red-eye reduction with slow
shutter speeds to capture background
details at night or under low light. Use for
portraits taken against a backdrop of night
scenery.

Np Fill flash + slow sync

Combines fill flash with slow shutter
speeds to capture details of poorly-lit
backgrounds.

Nr

Rear curtain +
slow sync

Combines rear-curtain sync (see below)
with slow shutter speeds to capture
poorly-lit background details.

Nq Rear-curtain sync

While in other modes the flash fires as the
shutter opens, in rear-curtain sync the
flash fires just before the shutter closes,
creating streams of light that appear to fol-
low moving light sources.

Flash pop-up control

Advertising