Avalon Acoustics Sentinel - Manual (Page 15)

15
3 System Set-up
WARNING: Failure to follow the set-up and wiring instructions explicitly may
cause damage to your loudspeakers and void your warranty.
Preparation
In order to begin system set-up, it is important that all materials are unpacked
and all cabinets are removed from the crates in accordance with Chapter 2,
Unpacking Instructions, beginning on page 9. Then remove all the empty
crates from the listening room to provide for additional assembly space.
Removing Apex‘ Couplers from Set-up Blocks
Remove all twenty Apex‘ couplers from the two set-up blocks (see Figure
3.1). Three couplers will get installed in each of the six cabinets. Use the 1/2"
open end wrench on the wrenching flats to loosen as required.
Figure 2.4 – To unpack the lower speaker cabinets..
Figure 3.1 – Removal of Apex‘ Couplers.