Alloy Computer Products NS-16T01FS - Manual (Page 20)

14
Ports 1~16 Status LEDs
¾ Link/ACT
On : When the Link/ACT LED lights on, the respective port is
successfully connected to an Ethernet network.
Blinking : When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet network.
Off : No link.
¾ 100Mbps
On : When the 100Mbps LED lights on, the respective port is
connected to a 100Mbps Fast Ethernet network.
Off : When the respective port is connected to a 10Mbps Ethernet
network
Fibre Module LEDs
¾ FX Link/ACT
On : When the fibre module is installed and connected to an
Ethernet network, the FX Link/ACT LED lights on.
Blinking : When the FX Link/ACT LED is blinking, the fibre module
is transmitting or receiving data on an Ethernet network.
Off : No link.
¾ FDX
On : When the FDX LED lights on, the fibre port is in full duplex
mode.
Off : When the green light is off, the fibre port is in half duplex
mode.