Alloy Computer Products NS-16T01FS - Manual (Page 25)

19
Login
First execute the terminal emulation program on the remote
workstation, and turn on the Switch. When logging into the
Switch, the following screen (Figure 10) prompt appears:
Password:
Figure 10. Login
Insert the password into the blank space and then press Enter to
log in to the Main Menu. If you are managing the Switch for the
first time, you should input the factory default password “admin”
to log in to the Switch. To change the password, first highlight
System Change Password to input your new password, and then
highlight Confirm Password to input your new password again
for confirmation.