AVerMedia Technologies EB1304 NET - Manual (Page 17)

11
TIME SEARCH (search by date and time):
1. Use the ▲ and ▼ buttons and select
SEARCH TIME. Then press or ▼
again to make the selection.
2. In the SEARCH TIME, user may now select the
date and time from where you want to begin the
video playback.
TIME SEARCH
START TIME
END TIME
: 2006 / 05 / 05 13 : 08 : 13
: 2006 / 05 / 04 10 : 00 : 01
: 2006 / 05 / 04 10 : 00 : 01 SEARCH TIME
HARD DISK :
Use the
▼
and ▼ buttons to move the selection to the left and right. Use the ▲
and ▼ buttons to select the date and time. Then press or ▼ again to make
the selection.
3. To start video playback, the time in second must be set. Use the ▼ buttons to move the
selection to the right most. Use the ▲ and ▼ buttons and select the time in second.
Then press or ▼ .
EVENT LIST (search by event):
1. Use the ▲ and ▼ buttons to select from
the list. Press or ▼ again to make the
selection. User and to go next page
or back to previous page.
Listed below are the following recording
conditions:
EVENT LIST
S
A
2006 / 05 / 03
2006 / 05 / 03 13 : 26 : 34
13 : 00 : 01 13 : 26 : 50
13 : 16 : 46
A 2006 / 05 / 03 12 : 00 : 01 13 : 00 : 01
B 2006 / 05 / 03 11 : 48 : 37 12 : 00 : 00
A 2006 / 05 / 03 11 : 30 : 23 11 : 31 : 18
A 2006 / 05 / 03 11 : 29 : 47 11 : 30 : 13
B 2006 / 05 / 03 11 : 28 : 55 11 : 28 : 58
S 2006 / 05 / 03 11 : 28 : 33 11 : 28 : 55
A 2006 / 05 / 03 11 : 25 : 41 11 : 28 : 32
A 2006 / 05 / 03 11 : 23 : 26 11 : 23 : 30
A – Always Recording
It records non-stop and automatically continue recording when interrupted
S – Sensor Recording
It records when the sensor has triggered
M – Motion Recording
It records when any movement has detected
B – Button Recording
It records when the REC record button is pressed
2. The “ ” play symbol would appear beside the channel number when you are previewing in
playback mode.