3 alarm/sensor setup – AVerMedia Technologies EB1304 NET User Manual

Page 44

Advertising
background image

38

or LOW.

(5) Auto Record

Enable/disable auto continue recording when interrupted (i.e., power

breakdown, video playback or configuration setup). It continue recording after

10 second of idleness. This is applicable in Always Record mode under

schedule setting.

(6) Audio Record

Enable/disable audio recording. To record sound, make sure the microphone is

connected to the unit

(7) Disk Overwrite Enable

Enable/disable replacing the earliest record when the hard disk space runs out.

By default, the HDD overwrite setting is enabled

(8) Motion Detection

- Motion Camera

Enable/disable the channel number to detect motion.

- Motion Record Time

Set the amount of time (in second) to record when a motion has detected.

- Sensitivity

Set the sensitivity level. The sensitivity is from high, 9~ 2 and low.

8.1.1.3 Alarm/Sensor Setup

(1)

(2)

(3)

(1) Alarm Setup

- Mail Alarm Enable

Enable/disable alarm sending mail when alarm has triggered or motion has

detected.

i

The Motion Detection must be enabled first, the alarm sending

mail will send out the mail when detect motion.

Advertising