AVerMedia Technologies EB1304 NET - Manual (Page 9)

3
1.5 Setting Up the DVR Unit
1.5.1 Installing the Hard Disk
The DVR unit allows user to install one hard disk. Before installing the hard disk,
make sure to set the hard disk master jumper setting. Adjust the jumper setting
according to the instructions on the hard disk label.
i
Use 40GB/ 7200RPM IDE interface hard disk or larger is recommended
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws
2. Push the cover backward and lift
3. Loosen the hard disk rack 4 screws 4. Secure the brackets on the hard disk