Audiovox FPE709 User Manual
Page 14
14
Using Your TV as a Monitor
1. First, press SOURCE button to choose AV IN mode.
2. Connect the AV Cable plugs to the AV out jack of AV Device as
below:
Yellow plug: Connect to the VIDEO OUT jack on the AV Device.
Red plug: Connect to the AUDIO IN R jack on the AV Device.
White plug: Connect to the AUDIO IN L jack on the AV Device.
3. Finally, Connect the AV cable
’s 1/8-inch plug to the AV IN jack on
the TV unit.
Not included
Using External Antenna
If the picture is not clear with the built-in rod antenna, try placing your
TV near a window or connecting an external antenna to the TV to
improve reception. If you are in an area with weak TV signals or inside
a concrete building, you might need an external antenna to improve
reception. The supplied external antenna provides convenience and
flexibility for receiving digital signals. A outdoor antenna could also be
used to pickup weak signals. Rather than using a
“screw-on F con-
nector
” to connect to your outdoor antenna Audiovox recommends
using Quick Slip-on
“F” connectors (not included).
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com