Audiovox FPE709 - Manual (Page 18)

18
- Check the speaker settings. Turn up the
volume.
- Press MUTE on the remote control to turn
off mute.
- Unplug the headphones.
- Remove any obstacles between the remote
and the TV.
- Use the remote control near the portable TV.
- Point the remote at the IR sensor on the TV.
- Replace the battery in the remote control.
SOLUTION PROBLEM
Remote control
doesn
’t work
No sound
The on screen
menu disappears
before I have time
to select an item. The OSD Duration may be set to low. Press
the MENU button to access the Menu, Press
the DOWN button to highlight
“OSD Duration”
and press ENTER to select this menu item.
Press the RIGHT arrow key to increase the
OSD Duration. Possible values are: 5, 10,
and 30 seconds.
The descriptions and characteristics in this owner ’s manual are for
the purpose of general reference only and not as a guarantee.
In order to provide you with the highest quality product, we may make
changes or modifications without prior notice. The English version
serves as the final reference on all product and operation details should
any discrepancies arise in other languages.
Troubleshooting (Cont)
After performing
a Autoscan, the
TV did not find
any TV channels
so the Channel
up and Down
buttons do not
function. Check and make sure the Antenna setting
is set correctly in the channel setup menu.
When an antenna is being used, the an-
tenna setting should be set to Air. When a
cable input is being used, the antenna
setting should be set to CATV.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com