Amana Wall Oven - Manual (Page 5)

4
Control Panel
Oven Cooking
A Bake Use for baking and roasting.
B Broil Use for broiling and top browning.
C Clean Use to set self-clean cycle.
D Keep Warm Use to keep cooked food warm in oven.
E Convect Bake Use for convection baking.
(select models)
F Convect Roast Use for convection roasting.
(select models)
G Clock Sets the clock.
H Favorite Use to set and save a specific Cook & Hold
procedure.
I Cook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
J Delay Programs the oven to start baking at a
later time.
K Oven Light Use to turn the oven light on or off.
L Cancel Cancels all operations except Timer and
Clock.
M Number Pads Use to set time and temperature.
N Autoset Use to quickly set temperatures.
O Oven Light Use to turn the oven light on or off.
P Timer One/Two Sets the timer.
A B C D E F G H I J K
L M N O P
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)
Using the Touchpads
• Press the desired pad.
• Press the number pads to enter time or temperature.
• Press the Autoset pad to enter temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the number pads or
the Autoset pad, the time or temperature will automatically
be entered. If more than 30 seconds elapse between
touching a function pad and the number pads, the func-
tion will be canceled and the display will return to the
previous display.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the Cancel (Upper Oven
Cancel for double wall ovens) and Favorite
pads for three seconds.
• 12 Hr flashes in the display.
2. Press the Autoset pad to select 24 Hr; press
again to select 12 Hr.
3. Set the time of day following the directions in
the To Set the Clock section.