ATEN CE-250 - Manual (Page 11)

Operation
The Local and Remote Units each have two LEDs to indicate their
operating status, as shown in the tables, below:
CE-250L (Local Unit):
LED
Operating Mode
Local Auto
Local Lights to indicate that the
local console is active
(the Remote LED is out). 1. Lights when the local console is
active (the Remote LED is out)
2. Turns off when the remote console is
active (the Remote LED turns on)
3. Flashes on and off alternately with
the Remote LED when neither
console is active.
Remote The LED is Off. 1. Lights when the remote console is
active (the Local LED is out)
2. Turns off when the local console is
active (the Local LED turns on)
3. Flashes on and off alternately with
the Local LED when neither console
is active.
CE-250R (Remote Unit):
LED Indication
Power 1. Lights steadily to indicate that the connection to the Local Unit
is ok.
2. Flashes when there is a problem with the connection to the
Local Unit.
On Line 1. Lights when the remote console is active.
2. Is Off when the local console is active.
3. Is Off when there is a problem with the connection to the
Local Unit.
- 9 -
2002-12-16