ATEN CE-250 - Manual (Page 5)

Computers
The following equipment must be installed on each computer that is to
be connected to the system:
M
With PS/2 Type Connectors:
M A VGA, SVGA or Multisync card.
M A 6-pin mini-DIN mouse port
M A 6-pin mini-DIN keyboard port
M
With AT Type Connectors:
M A VGA, SVGA or Multisync card.
M A DB-9 (standard serial), mouse port plus mouse adapter (part #
2A-105).*
M A 5-pin DIN (standard AT), keyboard port plus keyboard adapter
(part # 2A-106).*
* Not included - requires separate purchase.
Cables
M Although it is possible to use standard KVM cables to link computers
with PS/2 type keyboard and mouse ports to the CE-250L, for
optimum signal integrity and to simplify the layout, we strongly
recommend that you use the high quality CS Custom KVM Cable
that is provided with this package.
M It is not possible to use standard KVM cables to link computers with
AT type keyboard and mouse ports to the CE-250L. For those
computers, CS Custom KVM Cables must be used.
M Category 5 cable is the minimum required to connect the local and
remote CE-250 units. Cable of a lesser standard will result in
degrading the video signal. For best performance, we strongly
recommend Category 5 cable.
- 3 -
2002-12-16