ROTHENBERGER PORTACUT 185 - Manual (Page 19)

• Check that all items and accessories delivered. Check that all items and accessories delivered.
In case any discrepancy is found, immediately report the fact to the shop you purchased or our In case any discrepancy is found, immediately report the fact to the shop you purchased or our
sale office.
(The contents of this manual are subject to change without prior notice.)
(The contents of this manual are subject to change without prior notice.)
2. Components of the machine
2.1 Main Parts (Fig. A)
PORTACUT 185 BSR-BSP PORTACUT 185 BSR BSP
1 Front cover Front cover 21 Off-Switch Off Switch
2 PORTACUT plate PORTACUT plate 22 Chain Chain
3 Company plate Company plate 23 Chain handle Chain handle
5 Saw Blade Replacement seal Saw Blade Replacement seal 24 Clamp knob Clamp knob
6 Oblique cutting adjustment seal Oblique cutting adjustment seal 25 Feed screw guide Feed screw guide
7 Frame Frame 26 Clamper Clamper
8 Tension handle Tension handle 27 Stop bolt Stop bolt
9 Following pulley Following pulley 28 Chain holder Chain holder
10 Driving pulley Driving pulley 29 Overload protection switch Overload protection switch
11 Bearing Bearing 30 On-Switch On Switch
12 Saw blade Saw blade PORTACUT 185 BSP PORTACUT 185 BSP
13 Blade guide head F Blade guide head F 31 Threaded rod Threaded rod
14 Blade guide head R Blade guide head R 32 Rear clamping plate Rear clamping plate
15 Dog Dog 33 Front clamping plate Front clamping plate
16 Handle Handle 35 Motor Motor
17 Cutting load adjustment knob Cutting load adjustment knob 36 Bearing housing Bearing housing
18 Cutting load adjustment spring Cutting load adjustment spring 37 Bearing box Bearing box
19 Cable holder Cable holder 38 Cutting load chart Cutting load chart
20 Chain vice Chain vice 39 Clamp handle Clamp handle
2.2 Technical data
Item PORTACUT 185 BSR PORTACUT 185 BSP
Cutting capa-
bility
Round Ø 180 mm Ø 180 mm
Square à 150 mm à 150 mm
Angle cut --- Ø 77 mm (2 ½“)
à 75 mm
Blade speed 0,72 / 0,90 m/s (50 / 60 Hz)
Motor Condenser motor,
Voltage made to order,
420 W, 50 / 60 Hz
Protection class I
Machine dimension (L x W x H) 975 mm x 415 mm x 415 mm
ENGLISH 15