ROTHENBERGER ROWELD D 4/15 Aero Basic - Manual (Page 31)

ENGLISH 29
8 Technical data
Welding materials .......................... PP, PE, PVDF
Welding rate, approx. ..................... Ø 3 mm: 1,1 kg/h PP/PE
Ø 4 mm: 1,8 kg/h PP/PE
Welding rod ................................... Welding rod Ø 3 and 4 mm
Application range ........................... Wall thicknesses 4-15 mm and film/sheeting welds
Weight ........................................... 4,8 kg
Drive .............................................. 230 V or 120 V AC with speed control
Extruder heating system ................ 400 W / 120 V
Air preheater .................................. 2300 W / 230 V , 1750 W / 120 V
Air supply ....................................... Integrated air supply
Air rate ........................................... ------------
Protection class ............................. I
Protection type ............................... IP 20 according to DIN EN 60529
Cold start protection ....................... Start temperature interlock and startup timer for melt and
preheat air
9 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EC on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.