Ferguson Ariva Link 200 - Manual (Page 19)

10. First instalation
After you turned on your device for the first time or after a factory reset, the installation
wizard will start automatically.
10.1 Operating the menu
Select an option with the p/q, t/u keys.
Enter an option with the OK key.
10.1 Language selection
Menu language Select the menu language.
Audio
language
Select the standard audio language for programs.
Press MENU key to save the selection and to continue to the satellite search.
10.2 Satellite search
Satellite Select a satellite.
Transponder Select a transponder.
LNB
Select the LNB frequency.
22Khz
Select On or Off.
DiSEqC
Select the DiSEqC (A, B, C, D)/Mini A, B port for the selected
satellite.
DiSEqC 1.1
Select the DiSEqC port (1-16) for the selected satellite.
LNB Power
Select the LNB power.
Search Press (blue) key to start the search.
Search options
All/FTA/NIT/FAST SCAN
Select an option to start the search.
DiSEqC/USALS Select this Option to search all satellites (DiSEqC
switch) at one time.
NOTE
Press EXIT key to install an Unicable/SCD/DiSEqC
1.2/USALS system.
19