Ferguson Ariva Link 200 - Manual (Page 30)

15.11 Factory reset
Reset all channel data to the device factory settings. All stored channels, lists and
settings will be deleted.
NOTE: It is recommended to make a factory reset after you updated your set via
network or USB. Before you make a factory reset, export all data to the USB memory
with the export data function (chapter 5.4) and import them again after the factory
reset. In case the data cannot be imported, setup your set again.
16. SETTINGS
16.1 Network connection
During booting your device will connect automatically to the network.
Auto
To connect automatically by DHCP.
Manual To connect manually with a static IP address.
IP Enter the fixed IP address.
Subnet mask Enter the subnet mask address. In general it is 255.255.255.0.
Gateway Enter the router’s IP address.
DNS Server Enter the DNS Server’s IP address. In general it is the router’s IP
address. You can enter 2 DNS Server IP addresses.
Press MENU key to connect.
Modem
To connect with your telephone line.
Phone number Enter the phone number to dial in.
Press MENU key to connect.
16.2 ARIVA share
Stream movies, MP3s, photos (only supported formats) from your PC Shared
Documents Folder to the device in your local network.
Enter
ARIVA share (Settings menu) to connect.
Windows Select the PC Windows system (XP/Vista/Windows7).
PC IP address Enter the IP address of your PC. If required enter a
Username/Password.
PC Folder name Select the name of the Shared documents folder.
XP: Shared/SharedDocs.
Vista: Public.
Windows 7: Users.
Press MENU key to connect.
In case a connection cannot be established check your PC settings.
Enter the shared documents folder settings and activate the option: share this folder
in the network.
Enter the LAN (Local area network) settings and activate the option: File and Printer
Sharing for Microsoft Networks.
Check the shared documents folder names (XP-Shared/SharedDocs, Vista-Public,
Windows 7-Users). If the folder name is different, create a new shared folder
30