Arcam AV8 PReamp Processor E-2 User Manual
Page 16
E-16
E-16
E-17
E
n
g
li
sh
SAVING SETTINGS AND EXITING SETUP
Save Settings
No Save - Return to index
Save as:Preset 1*
Preset 2
Preset 3
Preset 4
Preset 5
Press OK to edit- OK to save
All the settings you have made on the previous screens can be saved
as a user profile and stored as one of five ‘Presets’. A choice of setup
presets caters for different events such as movies or sport, and for
different user preferences.
To make these customised settings easier to retrieve, you can give each
preset a memorable name, such as ‘John’, ‘Jacky’, ‘Movies’, ‘Sport’, ‘Rock’,
etc.
The presets store the complete setup of the AV8, including the modes
used for each of the inputs and if they are in direct mode or not.
The presets can be used to create different listening preferences. You
may wish to set up different presets for listening to music, watching
DVD, watching TV material or for different listening positions.
To change the name of a preset, highlight it by using the
navigation
5
and
6
buttons. Press the
OK
button to edit. Using
the
5
and
6
navigation buttons, cycle through and select lower case
letters (a…z), upper case letters (A…Z) and numbers (0…9). Move
along the line using the
3
and
4
buttons.
When you are satisfied with the text you have written, press
OK
to save
the preset name and to store the setup parameters under this name.
IMPORTANT NOTE: Settings must be explicitly saved before the
unit is switched off, otherwise changes to the settings will be lost and
the unit will need to be set up again.