Arcam AV8 PReamp Processor E-2 - Manual (Page 38)

E-38
E-38
E-39
E
n
g
li
sh
Basic Sub
Command Parameters Description Parameter values
CRF CRFy Crossover Frequency y may have a value in the range 0 to 11:
0 = 40Hz
11 = 150Hz
(in 10Hz steps)
STM STMy Stereo Mode y may have the values 0 to 2, as follows:
0 = Large+Sub, 1 = Sat+Sub, 2 = Large.
LFE LFEy LFE Level y may have a value in the range -10 to 0:
-10 = –10dB
0 = 0dB
DLF DLFy DTS LFE Gain y may have the values 0 to 1, as follows:
0 = 0dB Normal, 1 = –10dB.
SST SSTy Sub Stereo y may have a value in the range -10 to 0:
-10 = –10dB
0 = 0dB
DAL DALy DVD-A Sub Level y may have the values 0 to 1, as follows:
0 = 0dB Normal, 1 = +10dB.
NSW NSWy No. of Subwoofers y may have the values 1 to 3, for 1 to 3 subwoofers.
Basic THX
Command Parameters Description Parameter values
TEX TEXx THX Surround EX Flag detection
U2S U2Sx THX Ultra 2 Sub
BGC BGCx Boundary Gain Compensation
ASA ASAy Advanced Speaker Array y may have the values 0 to 2, as follows:
0 = 0–12”, 1 = 12–48”, 2 = 48”+.