Setup commands – basic – Arcam AV8 PReamp Processor E-2 User Manual

Page 37

Advertising
background image

E-36

E-36

E-37

E

n

g

li

sh

SETUP COMMANDS – BASIC

Basic General

Command

Parameters

Description

Parameter values

VDS

VDSy

Volume Display

y may have the values 0 to 2, as follows:
0 = Normal, 1 = dB ref, 2 = Fine.

MXV

zMXVy

Max Volume

y may have a value in the range -33 to +19:
-33 = –33dB

+19 = +19dB

MXO

zMXOy

Max On Volume

y may have a value in the range -53 to +19:
-53 = –53dB

+19 = +19dB

DYU

DYUy

Delay Units

y may have the values 0 to 2, as follows:
0 = Imperial, 1 = Metric, 2 = Time.

OMD

OMDy

OSD Mode

y may have the values 0 to 1, as follows:
0 = Full Page, 1 = Mixed.

VST

VSTy

Video Status

y may have the values 0 to 1, as follows:
0 = Scart, 1 = Screen Control.

HQV

HQVy

HQ Video

y may have the values 0 to 1, as follows:
0 = RGB, 1 = Component.

SYG

SYGx

Sync On Green

Basic Speakers

Command

Parameters

Description

Parameter values

AST

ASTy

Auto Setup

y may have the values 0 to 5, as follows:
0 = THX, 1 = THX SurrEX, 2 = Config. 1, 3 = Config. 2, 4 = Config. 3, 5 = Custom.

SSZ

SSZsy

Speaker Size

y may have the values 0 to 2, as follows:
0 = None, 1 = Small/Present, 2 = Large.

5P1

5P1y

5.1 Rears

y may have the values 0 to 2, as follows:
0 = SurrL/R, 1 = SurrBackL/R, 2 = Both.

Basic Delay

Command

Parameters

Description

Parameter values

DLY

DLYsy

Speaker Delays

y may have a value in the range below, depending on the chosen delay units:
Imperial: 0 to 117 feet in 1ft steps

Metric: 0 to 12.7 meters in 0.1m steps

Time: 0 to 105 milliseconds in 1ms steps

Basic Levels

Command

Parameters

Description

Parameter values

LVL

LVLsy

Speaker Level settings

y may have a value in the range -10 to +10:
-10 = –10dB

+10 = +10dB

Advertising