Attachment sets – Karcher HD 13-12-4 ST User Manual
Page 29
-
12
Attachment sets
Remote controls
1
Upgrade kit, remote re-
lease*
2.637-491.0
1 operating point. Restoring the operation readiness after the readiness period has
elapsed. Several operating stations can be used parallelly.
2
Upgrade kit for remote con-
trol, HD simple*
2.744-014.0
1 operating point. Actuation of the high pressure pump and up to two detergent. Use
of 2 operating stations or one operating station and one coin remote control (item 3)
in connection with the priority switch (item 4).
3
Upgrade kit coin remote
control*
2.642-422.0
Coin remote control. Actuation of the high pressure pump and up to two detergents
after coin insertion.
4
Upgrade kit priority switch* 2.638-200.0
Switching between 2 remote controls (item 2) or one remote control (item 2) and one
coin remote control (item 3).
5
Upgrade kit control electron-
ics, multi remote control*
2.744-036.0
Actuation of the high pressure pump and two detergents from up to 6 operating sta-
tions (item 6). Additional connectivity for a coin remote control (item 3).
6
Upgrade kit operating sta-
tion, multi remote control
2.744-015.0
Operating station for multi remote control (item 5).
7
Upgrade kit emergency
stop*
2.744-002.0
Interrupts the mains supply to the system.
8
Upgrade kit junction box
2.744-798.0
Is needed to connect the upgrade kits (item 1) through (item 7) to the appliance. Com-
pletely wired, connection via connectors on the appliance.
9
Upgrade kit, connection box
for remote release
2.209-807.0
Required to connect the upgrade kits remote release (item 1) and emergency stop
(item 7).
Attachment kits
1
Upgrade kit pressure relief 2.209-773.0
Relieves the high pressure system of pressure after the readiness period has elapsed.
2
Upgrade kit, single deter-
gent for low-pressure opera-
tion*
2.209-779.0
Necessary when selecting one detergent via the remote control. Consists of 1 sole-
noid valve and 1 level sensor**.
3
Upgrade kit, double deter-
gent for low-pressure opera-
tion*
2.209-780.0
Necessary when selecting a second detergent via the remote control (optional for item
5). Consists of 1 solenoid valve, 1 level sensor and 1 dispensing valve.
4
Upgrade kit, single deter-
gent in high pressure mode*
2.209-799.0
Allows the dispensing of detergent in high pressure mode. Is necessary to actuate a
detergent via a remote control. The appliance has standard detergent dispensing in
low pressure mode, which is activated by switching the triple nozzle. When installing
this upgrade kit, you will not need to switch over with the triple nozzle.
5
Upgrade kit, double deter-
gent in high pressure mode*
2.209-800.0
Allows the dispensing of detergent in high pressure mode. Is necessary to actuate a
second detergent via a remote control. The appliance has standard detergent dis-
pensing in low pressure mode, which is activated by switching the triple nozzle. When
installing this upgrade kit, you will not need to switch over with the triple nozzle.
6
Upgrade kit for water soften-
ing (DGT)
2.209-777.0
Prevents lime buildup in hot water mode by dispensing softener liquid.
7
Upgrade kit hour meter
2.209-778.0
Captures the operating times of the appliance to be able to keep the maintenance in-
tervals.
8
HWE 860
3.070-036.0
Heats the supplied water using an electrically heated boiler.
9
Upgrade kit floor rack St
2.210-058.0
To install the appliance when a wall mount is not possible.
Steel model, painted.
10
Upgrade kit floor rack VA
2.210-059.0
To install the appliance when a wall mount is not possible.
Stainless steel model, rustproof.
11
Upgrade kit solenoid valve
for water inlet
2.209-788.0
Interrupts the water supply during appliance standstill.
* upgrade kit junction box required
**The appliance has standard detergent dispensing in low pressure mode, which is activated by switching the triple nozzle.
29
EN