Changing/ replacing filter, Troubleshooting, Indicator lamp "filter blocked" glows – Karcher IV 60-36-3 W User Manual

Page 16: Motor (suction turbine) does not start, Suction capacity decreases slowly, Dust comes out during the vacuuming

Advertising
background image

– 6

Switch off the appliance using the ON/
OFF switch and separate it from the
mains.

1 Handle for filter cleaning
2 Spring
3 Fastener for filter dedusting
4 Suction head cap

Tilt the fastener for filter dedusting to-
wards the side.

Unscrew the handle for filter shake-off.

Open both the suction head caps.

1 Suction head
2 Frame
3 Filter

Remove the suction hand.

Open the knot of the tapes on the filter
and remove the frame.

Take out the filter.

Insert and secure the new filter in the re-
verse sequence of steps.

ƽ

Danger

Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
You can thus solve any problems that may
occur.

Filter is blocked

Switch off the appliance using the ON/
OFF switch and separate it from the
mains.

Tilt the fastener for filter dedusting to-
wards the side.

Move forcefully the handle for filter de-
dusting in an upward and downward di-
rection.

Place the fastener for filter dedusting in
a vertical position.

If cleaning the filter does not bring any
results, then replace the filter

No electrical voltage.

Check cables, plugs and socket.

Filter, nozzle, suction hose or suction pipe
may be blocked.

Check, clean the accessories, replace
the filter, if required.

Filter has not been fastened correctly or is
defective.

Check to see if filter is sitting properly;
replace if required.

Changing/ replacing filter

Troubleshooting

Indicator lamp "Filter blocked"

glows

Motor (suction turbine) does not

start

Suction capacity decreases slowly

Dust comes out during the

vacuuming

16

EN

Advertising