Advantech Vechicle Mounted Terminal PPC-V106 - Manual (Page 30)

PPC-V106 User Manual 18
3.4 Installing the Universal Arm
1. Press latches at the same time and then rotate support-1 until you
can see both of the screw holes.
2. Rotate support-2 until the angle is the same as support-1.
3. Use four M4x8L screws and attach the U-Arm with the PPC-V106.
The 4 stainless screws can be found in the universal arm's box.
4. Use latches adjust the angle of PPC-V106 (every 14.4° on 360°).
Note: Support-1 can be on the right or left.
Figure 3.2: Universal Arm
Screw-M4x8L
Latch
(x4)
Support-1
Support-2
PPC-V106