Sony LF-PK1 - Manual (Page 19)

LF-PK1 2-893-070- 11(1)
GB
15 (GB)
Make Video Settings with the
LocationFree Player
■ Configure the on-screen remote control
for video
(For the connection to external devices in STEP 1
on page 8)
1 Click anywhere inside the window, and then
click [Settings] at the bottom right of the
window.
[Settings]
 Tip
[Settings] at the bottom right of the window appears only
when you are connected to the Base Station. When you are
not connected, click [Connect] at the bottom left, select the
Base Station you want to set up from the list that appears, click
[Properties], and then click [Video Settings].
2 Select [Video Settings], [Remote Settings],
and then [Video 1] or [Video 2], then select
the make and type of the connected external
device.
 Tip
You can also use “Additional Remote Control Data”
downloadable from the LocationFree Support website at
http://www.sony.net/Products/LocationFree/support/.
If you cannot find the on-screen remote control data of your
external device in the current [Remote Settings] list, try above.
[Power] Select the make.
Select
the type.
If the configuration above is correct, each time you click
[Power], your external device should turn on or off.*
* After clicking [Power], it takes five seconds or more for the
external device to respond. If it does not respond, make sure
that the make and type are correct, and then try again.
Continued