Sony LF-PK1 - Manual (Page 32)

LF-PK1 2-893-070- 11(1)
28 (GB)
• The button names or button numbers of the on-screen remote
control may differ from those of the remote control supplied with
your device.
■
Configure the colour system for video
(For watching video in PAL, SECAM, PAL60, NTSC,
etc.)
1 Press the button during video playback.
Select from the LocationFree Player
control panel, and then press the button.
2 Select [Advanced Settings], and then press the
button.
3 Select [Video Signal Settings], and then press
the button.
4 Select a colour system, and then press the
button.
5 Select [OK], and then press the button.
To enable the change of the colour system settings, you
need to disconnect the NetAV connection once, and then
reconnect it.