Sony LF-PK1 - Manual (Page 31)

LF-PK1 2-893-070- 11(1)
GB
27 (GB)
5 After downloading, reconnect to the Base
Station.
6 Perform Step 1 to 3 again.
7 Select the manufacturer of the connected
external device, and then press the right
button.
8 Select the product type of the connected
external device, and then press the right
button.
9 Test the remote control to make sure it works,
and then press the right button.
By selecting [Power] and then pressing the button, you
can turn the external device on and off.
In some cases it may take as long as 5 seconds for the
external device to turn on after you press the button.
10 Save your settings.
Press the button to save settings on the PSP™ system.
Notes
• Even if the power turns on and off correctly with [Power], other
buttons may not be enabled. If this happens, select [Video 1] or
[Video 2] from the Index. With the on-screen remote control,
confirm that the buttons are enabled.
• Try all the models that appear on the screen to select the most
suitable on-screen remote control for the connected devices.
Configure the video settings
■ Configure the on-screen remote control
for video
(For connecting to external devices, as
instructed in 3 of STEP 1 on page 9)
You can adjust settings for the on-screen remote control that will
be used to operate external devices such as STB or PVR that are
connected to the Base Station. To adjust these settings, Memory
Stick Duo™ media is required.
1 Press the button during video playback.
Select from the LocationFree Player
control panel, and then press the button.
2 Select [Remote Control Settings], and then
press the button.
3 Select [Video 1] or [Video 2] for the connected
external device you want to use the remote
control for, and then press the button.
4 A message appears indicating that you need
to download remote control data. Select [Yes],
and then press the button.
Follow the on-screen instructions to download remote
control data onto Memory Stick Duo™ media.
Continued