Aurora Multimedia ICS-SP20 - Manual (Page 8)

ICS-SP20 User Manual
7
Keys: 0-9
Dialog: “SWITCH TO” – enter new channel number, several digits can be entered if necessary. Channel
is switched to after a 3 seconds timeout (since the most recent digit is entered) or after pressing
TV/Video/FM or R key.
Key: “ID OFF”
Enter the main configuration menu. See the Menu System chapter
Key: “Chroma”
Enter selections for the menu.
Key: “ON/STBY”
Switch ICS-SP20 power on/off. The display panel is switched accordingly if it is connected using the RS-
232 port or IR output port.
7.2 Menu Structure
The menu system allows a user to control various aspects of ICS-SP20 configuration.
For all menus, up/down arrows move the cursor (yellow “selection” highlight) up/down. Central key
selects the current submenu/option and finishes text entry (passwords, channel labels, etc.). Left/right
arrow changes the currently active option, if possible.
When in “text edit” dialog (e.g., channel label editing), left/right arrows move the cursor left/right,
up/down arrows change the character at the cursor.
The main menu:
This menu allows a user to select the desired sub-menu for further configuration or to set default
settings. “Set default settings”.
These sub-menus are discussed in more detail in the subsequent chapters.