Sony NAS-CZ1 - Manual (Page 12)

12 GB
After the software installation is complete, connect the system to your computer using the Ethernet port
of your computer, a router with a built-in network switch, or a network switching device.
The connection method may vary depending on your network. Connection with a personal computer is
described here as an example.
For details, refer to the Connection manual contained on the supplied CD-ROM.
Example: DSL or cable modem equipped with a built-in router (without
network switch ports)
* Connections may vary depending on your network.
Connecting the system to the network
Internet
DSL or cable
modem with a
built-in router*
Hub
Network cable
(supplied)
To Ethernet port
NAS-CZ1 Computer NAS-CZ1