ATEN CS-88A User Manual
Page 30
(F3 SET: continued)
Setting
Function
PORT ID
DISPLAY
MODE
Selects how the Port ID is displayed: the Port Number alone
(PORT NUMBER); the Port Name alone (PORT NAME); or the Port
Number plus the Port Name (PORT NUMBER + PORT NAME). The
default is PORT NUMBER + PORT NAME.
SCAN
DURATION
Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see p. 30). Key in
a value from 1 - 255 seconds, then press [Enter]. Default is 5
seconds; a setting of 0 disables the Scan function.
SCAN/SKIP
MODE
Selects which computers will be accessed under Auto Scan
Mode (see p. 30). Choices are: ALL - All the Ports which have
been set Accessible (see p. 29); POWERED ON - Only those
Ports which have been set Accessible and are Powered On;
QUICK VIEW - Only those Ports which have been set Accessible
and have been selected as Quick View Ports (see p. 29); QUICK
VIEW + POWERED ON - Only those Ports which have been set
Accessible and have been selected as Quick View Ports and are
Powered On. The default is ALL.
Note: The Quick View choices only show up on the
Administrator’s screen, since only he has Quick View setting
rights (see p. 29, for details).
SCREEN
BLANKER
If there is no input from the console for the amount of time set
with this function, the screen is blanked. Key in a value from 1 -
30 minutes, then press [Enter]. A setting of 0 disables this
function. The default is 0.
2002-12-27
26
CS-88A User Manual