Asus AP1600R-E2 - Manual (Page 35)

2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 )
2.7.5 2.7.5 2.7.5 2.7.5 2.7.5 Motherboard Motherboard Motherboard Motherboard Motherboard
To uninstall the motherboard:
1. Disconnect all the pre-connected cables from the motherboard. See
section “2.6 Cable connections” for illustration.
2. Uninstall all the devices from the motherboard including the CPU and
heatsink, riser card bracket, and DDR DIMMs. Refer to the
corresponding sections for instructions on removing these
components.
3. Remove the riser card standoff by twisting it counterclockwise.
4. Carefully lift the motherboard
out of the chassis as shown.
3. Use a Phillips (cross) screwdriver
to remove the screws that
secure the motherboard to the
base of the chassis.
R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f