Sony KLV-15SR1 - Manual (Page 23)

23 Adjusting Your Setup (MENU)
5
Press v to select
“SEARCH” at the bottom,
then press OK.
6
Press b to search for a
higher-numbered
channel, or press B for a
lower-numbered channel.
Press B or b again if the broadcast that appears on the TV screen is
not the desired one. Repeat the procedure until your desired
channel’s broadcast appears.
7
When the desired channel is
found, press OK.
The “MANUAL SET-UP”
menu reappears.
8
To preset other channels, repeat steps 1 to 7.
To return to the normal screen
Press MENU.
To fine tune a programme
Normally “AFT: ON” gives the best possible picture. However, you
may manually fine tune the programme if the picture is distorted
with “AFT: ON.”
While watching the programme, display the “MANUAL SET-UP”
menu and select “AFT.” Then press
B or b to fine tune between -15
and +15 until the best possible picture is obtained.
Note
• If you perform “SEARCH” after fine tuning, “AFT” is automatically reset
to “ON.”
To name the preset channel
You can name the preset channel using up to five characters (letters
or numbers, e.g., BBC).
(1) Select the programme number with the preset channel you
want to name on the “MANUAL SET-UP” menu.
OK
MANUAL SET–UP
EXIT : MENU
PROGRAMME 2
VHF–L
OK
MANUAL SET–UP
EXIT : MENU
PROGRAMME 2
VHF–L
OK
OK
OK
MANUAL SET–UP
EXIT : MENU
PROGRAMME
NAME
SKIP
AFT
SYSTEM
BAND
: 2
: AAA
: ON
: ON
: B/G
: VHF–L
SEARCH : OK
continued